VISHAY DG211BDY

Manufacturer No:

DG211BDY

Manufacturer:

VISHAY

Package:

16-SOIC (0.154, 3.90mm Width)

Description:

300ns, 200ns SPST - NC 85Ohm Analog Switches BREAK-BEFORE-MAKE 16 Pins 500pA 16-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

DG211BDY information

VISHAY DG211BDY technical specifications, attributes, parameters and parts with similar specifications to VISHAY DG211BDY.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
16-SOIC (0.154, 3.90mm Width)

Number of Pins
16

Weight
547.485991mg

Operating Temperature
-40°C~85°C TA

Packaging
Bulk

JESD-609 Code
e0

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
16

Resistance
85Ohm

Terminal Finish
Tin/Lead (Sn/Pb)

Subcategory
Multiplexer or Switches

Max Power Dissipation
640mW

Technology
CMOS

Terminal Form
GULL WING

Number of Functions
4

Terminal Pitch
1.27mm

Pin Count
16

Polarity
Inverting

Power Supplies
512/+-15V

Max Supply Voltage
25V

Operating Supply Current
30mA

Nominal Supply Current
30mA

Power Dissipation
640mW

Max Supply Current
10?A

Turn On Delay Time
300 ns

Number of Inputs
4

Voltage - Supply, Single/Dual (±)
4.5V~25V ±4.5V~22V

Supply Type
Dual, Single

Turn-Off Delay Time
200 ns

Max Dual Supply Voltage
22V

On-State Resistance (Max)
85Ohm

Min Dual Supply Voltage
4.5V

High Level Output Current
100mA

Multiplexer/Demultiplexer Circuit
1:1

Current - Leakage (IS(off)) (Max)
500pA

Channel Capacitance (CS(off), CD(off))
5pF 5pF

Switch Circuit
SPST - NC

Switch Time (Ton, Toff) (Max)
300ns, 200ns

Charge Injection
1pC

Channel-to-Channel Matching (?Ron)
2 ?

Crosstalk
-95dB @ 100kHz

Switching
BREAK-BEFORE-MAKE

Drain to Source Resistance
85Ohm

Download datasheets and manufacturer documentation for VISHAY DG211BDY.

Datasheets:

vishaysiliconix-dg212bdyt1-datasheets-7664.pdf

vishay-dg211bdy-datasheets-8358.pdf

vishay-dg211bdy-datasheets-8359.pdf

RohsStatement:

vishaydale-imc0402rk47nj-rohsstatement-4552.pdf

DG211BDY Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Bulk. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 1:1. Increasing operating temperature to around -40°C~85°C TA. Totally, there are 16 terminations. A total of 16 pins are injected into the electrical part body. A SPST - NC switching circuit is used for these analog switches. In this multiplexer, the internal resistance is 85Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 25V to the switch device in normal circumstances. The digital multiplexer has a low cost Dual, Single supply. 4.5V is the lowest voltage the electrical component should receive. For this digital switch to work, 30mA current would suffice. Putting voltage greater than 10?A on the multiplexer may cause damage. There is no problem with using dual supply voltage, but it should not exceed 22V. With dual power supplies, you should attach at least 4.5V. The 4 inputs need to be operated in order to work. A Drain to Source resistance of 85Ohm is shown for this electronic part.

DG211BDY Features

Switch Circuit: SPST - NC
30mA Supply Current
Drain-to-Source resistance: 85Ohm

DG211BDY Applications

There are a lot of Vishay Siliconix
DG211BDY Analog Switches & Multiplexers ICs applications.

Precision data acquisition
Battery-powered systems
Sample-and-hold systems
Communication systems
Data Acquisition Systems
Relay Replacement
Battery Powered Systems
Existing multiplexer applications (both fault-protected and nonfault-protected)
New designs requiring multiplexer functions
Cellular phones

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.