ONSEMI FAN1100-F085

Manufacturer No:

FAN1100-F085

Manufacturer:

ONSEMI

Package:

8-SOIC (0.154, 3.90mm Width)

Description:

Ignition Gate Driver IC

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

FAN1100-F085 information

ONSEMI FAN1100-F085 technical specifications, attributes, parameters and parts with similar specifications to ONSEMI FAN1100-F085.

Type
Parameter

Drive Source Current Typ (A)
-

Package Type
SOIC-8

Case Outline
751EB

MSL Temp (°C)
225

Vin Max (V)
-

VCC Max (V)
-

Fall Time (ns)
-

Turn Off Prop. Delay Typ (ns)
-

Delay Matching
-

MSL Type
3

Container Type
REEL

Power Switch
IGBT

Topology
Single

Container Qty.
2500

Number of Outputs
1

Isolation Type
Non-Isolated

Drive Sink Current Typ (A)
-

Rise Time (ns)
-

Turn On Prop. Delay Typ (ns)
-

Download datasheets and manufacturer documentation for ONSEMI FAN1100-F085.

Package Drawing:

bdb7708c6d5b688eda530b03da666514.pdf

Datasheet:

d1508575fc9fe7023880015eebebed27.pdf

The FAN1100_F085 is designed to directly drive an ignition IGBT and control the current and spark event of the coil. The coil current is controlled via the input pin. When the input is driven high, the output of the FAN1100_F085 is enabled to turn on the IGBT and start charging the coil. The FAN1100_F085 will sink a current (IIN) into the input pin based on programmed current on the RA line. An input spike filter suppresses input signals of less then 13 µsec in duration. A Max Dwell timer is included in the FAN1100_F085 which will turn off the IGBT if the input stays active for longer than the programmed time. This time interval can be modified through an external capacitor on the CSSD pin. When the Max Dwell timer is exceeded, the FAN1100_F085 will enter a Soft-ShutDownmode (SSD) slowly dropping the collector current by lowering the gate drive to the IGBT thereby discharging the coil such as to inhibit a spark event. Once the soft shutdown operation has started, any transitions on the input signal are ignored until after completion of the soft shutdown function. The FAN1100_F085 will also limit the collector current of the IGBT to Ic(lim) during charging. This again is done through the sense resistor in the emitter leg of the Ignition IGBT developing a signal input to the Vsense pin of the FAN1100_F085.

Feature

Signal Line Input Buffer
Input spike filter
Operation from Ignition or Battery line
Ground shift tolerance +/- 1.5 V
Programmable maximum dwell time
Programmable Input Pull down current
Control IGBT current limiting through Vsense pin
Soft Shutdown following Max Dwell Time out

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.