TI INA121PAG4

Manufacturer No:

INA121PAG4

Manufacturer:

Package:

PDIP

Description:

1 Channels 14mA per Channel 50pA 90 dB Instrumentational OP Amps 0.00005μA 8 Pins PDIP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

INA121PAG4 information

TI INA121PAG4 technical specifications, attributes, parameters and parts with similar specifications to TI INA121PAG4.

Type
Parameter

Package / Case
PDIP

Surface Mount
NO

Number of Pins
8

Weight
528.605208mg

JESD-609 Code
e4

Number of Terminations
8

ECCN Code
EAR99

Resistance
1 TΩ

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
85°C

Min Operating Temperature
-40°C

Subcategory
Instrumentation Amplifier

Terminal Position
DUAL

Terminal Form
THROUGH-HOLE

Number of Functions
1

Supply Voltage
15V

Terminal Pitch
2.54mm

Pin Count
8

Number of Elements
3

Temperature Grade
INDUSTRIAL

Number of Channels
1

Max Supply Voltage
36V

Min Supply Voltage
4.5V

Operating Supply Current
450μA

Quiescent Current
450μA

Slew Rate
0.07 V/μs

Amplifier Type
INSTRUMENTATION AMPLIFIER

Common Mode Rejection Ratio
90 dB

Current - Input Bias
50pA

Output Current per Channel
14mA

Input Offset Voltage (Vos)
300μV

Bandwidth
600 kHz

Neg Supply Voltage-Nom (Vsup)
-15V

Voltage Gain
80dB

Average Bias Current-Max (IIB)
0.00005μA

Max Dual Supply Voltage
18V

-3db Bandwidth
600 kHz

Min Dual Supply Voltage
2.25V

Dual Supply Voltage
15V

Input Voltage Noise Density
20nV/sqrt Hz

Voltage Gain-Nom
10

Non-linearity-Max
0.002%

Radiation Hardening
No

RoHS Status
RoHS Compliant

Lead Free
Lead Free

Download datasheets and manufacturer documentation for TI INA121PAG4.

INA121PAG4 Overview

Packaged in a PDIP case, the buffer op amp is ready to use. An op amp ic of the INSTRUMENTATION AMPLIFIER type. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. I would like to specify that this buffer amplifier belongs to the Instrumentation Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 300μV for this buffer op amp. As long as the supply current of the chip does not exceed 450μA, this op amp ic can operate. 80dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 85°C should be used. The linear amplifier consists of 3 different elements in total. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 36V. A high supply voltage of more than 4.5V is recommended for the instrumentation amplifier's supply voltage. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 18V volts. Currently, linear amplifier is operating with a quiescent current of 450μA. Instrumentation amplifier resistance should stay within the range of 1 TΩ.

INA121PAG4 Features

8 Pins
supply voltage of 15V
80dB voltage gain
Resistance of 1 TΩ

INA121PAG4 Applications

There are a lot of Texas Instruments
INA121PAG4 Instrumentational OP Amps applications.

Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.