INFINEON IPS1031SPBF

Manufacturer No:

IPS1031SPBF

Manufacturer:

INFINEON

Package:

TO-263-3, D2Pak (2 Leads + Tab), TO-263AB

Description:

N-Channel PMIC IPS1031SPBF 3 Pin TO-263-3, D2Pak (2 Leads + Tab), TO-263AB

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

IPS1031SPBF information

INFINEON IPS1031SPBF technical specifications, attributes, parameters and parts with similar specifications to INFINEON IPS1031SPBF.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
TO-263-3, D2Pak (2 Leads + Tab), TO-263AB

Number of Pins
3

Supplier Device Package
D2PAK

Operating Temperature
-40°C~150°C TJ

Packaging
Tube

Published
2006

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Type
Switch

Resistance
40mOhm

Max Operating Temperature
150°C

Min Operating Temperature
-40°C

Power Rating
3.1W

Max Power Dissipation
3.1W

Current Rating
4A

Base Part Number
IPS1031SPBF

Number of Outputs
1

Output Type
N-Channel

Max Output Current
3.3A

Operating Supply Voltage
36V

Voltage
5.5V

Interface
On/Off

Min Supply Voltage
4.5V

Current - Output (Max)
3.3A

Current
3.3A

Output Configuration
Low Side

Power Dissipation
3.1W

Output Current
18A

Voltage - Supply (Vcc/Vdd)
Not Required

Input Type
Non-Inverting

Switch Type
General Purpose

Clamping Voltage
39V

Output Current per Channel
3.3A

Rise Time
20?s

Fall Time (Typ)
15 ?s

Nominal Input Voltage
5.5V

Continuous Drain Current (ID)
6A

Ratio - Input:Output
1:1

Voltage - Load
28V Max

Fault Protection
Current Limiting (Fixed), Over Temperature

Input Current
32?A

Rds On (Typ)
40mOhm

Drain to Source Resistance
40mOhm

Height
4.826mm

Length
10.668mm

Download datasheets and manufacturer documentation for INFINEON IPS1031SPBF.

Datasheets:

infineontechnologies-ips1031strrpbf-datasheets-2507.pdf

ConflictMineralStatement:

infineon-b43821a4225m000-conflictmineralstatement-7662.pdf

IPS1031SPBF Overview

It is packaged in the form of a Tube.It is included with the TO-263-3, D2Pak (2 Leads + Tab), TO-263AB package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~150°C TJ.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of N-Channel volts can be obtained with this LED driver.As you can see, it comes from the IPS1031SPBF family.During operation, the 3 pins are used.From the lighting driver, there is a maximum output of 3.3AV.To comply with the operation criteria, the maximum output current is reduced to 3.3A.Surface Mount is mounted in the way of this LED driving board.In this case, there is 40mOhm resistance in the LED driving board.This results in a 18A output current.For maximum efficiency, the supply voltage should be set to 36V.It is designed to be stable at 150°C°C, which is the maximum operating temperature.The LED driver must work at a minimum temperature of -40°C degrees Celsius in order to remain reliable.It can handle a maximum voltage of 5.5VV.It can also be used at 4.5Vvolts if needed.In this case, the electrical component is classified as Switch.

IPS1031SPBF Features

Resistance of 40mOhm

IPS1031SPBF Applications

There are a lot of Infineon Technologies
IPS1031SPBF Power Switches ICs applications.

Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards
HDD, SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.