ONSEMI LA6585FA-BH

Manufacturer No:

LA6585FA-BH

Manufacturer:

ONSEMI

Package:

8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Description:

Tape & Reel (TR) 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Logic 2.2V~14V Surface Mount -30°C~90°C TA DC Motors, General Purpose Half Bridge (2) Inductive 2.2V~14V

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

LA6585FA-BH information

ONSEMI LA6585FA-BH technical specifications, attributes, parameters and parts with similar specifications to ONSEMI LA6585FA-BH.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 2 days ago)

Factory Lead Time
5 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
8-TSSOP, 8-MSOP (0.118, 3.00mm Width)

Number of Pins
8

Operating Temperature
-30°C~90°C TA

Packaging
Tape & Reel (TR)

Published
2012

JESD-609 Code
e3

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
8

Terminal Finish
Tin (Sn)

Applications
DC Motors, General Purpose

Subcategory
Motion Control Electronics

Technology
Bipolar

Voltage - Supply
2.2V~14V

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
NOT SPECIFIED

Number of Functions
1

Supply Voltage
12V

Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED

Base Part Number
LA6585

Pin Count
8

Number of Outputs
1

Qualification Status
Not Qualified

Supply Voltage-Min (Vsup)
2.2V

Interface
Logic

Analog IC - Other Type
BRUSHLESS DC MOTOR CONTROLLER

Nominal Supply Current
9mA

Output Configuration
Half Bridge (2)

Power Dissipation
400mW

Output Current
500mA

Halogen Free
Halogen Free

Collector Emitter Voltage (VCEO)
14V

Max Collector Current
500mA

Voltage - Load
2.2V~14V

Fault Protection
Over Temperature

Motor Type
Brushless DC (BLDC)

Load Type
Inductive

Height
850?m

Length
3mm

Width
3mm

RoHS Status
RoHS Compliant

Download datasheets and manufacturer documentation for ONSEMI LA6585FA-BH.

Datasheets:

onsemiconductor-la6585fabh-datasheets-5936.pdf

PCN Packaging:

onsemiconductor-esd8011mut5g-pcnpackaging-0098.pdf

LA6585FA-BH Overview

For packaging, Tape & Reel (TR) is used.A cost-saving measure is taken to include H bridge in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.The supply voltage 2.2V~14V has the capabilbridge drivery of improving reliabilbridge drivery.H bridge circuit is put into place according to the way of Surface Mount.When -30°C~90°C TA is operating at a certain temperature, motor driver H bridge can function normally.Among H bridge motor drivers many applications are DC Motors, General Purpose.Mount the board using Surface Mount.Transmission lines can be terminated with a termination that matches the characteristic impedance of the line using 8 terminations.An interface using 8 pins is used to provide pronged contact.Based on its base H bridge ic number of LA6585, more closely related H bridge ics can be found.The H bridge is powered by a voltage supply of 12V.H bridge circuit has been incorporated with BRUSHLESS DC MOTOR CONTROLLER as its analog IC type.The output and power supply pins are flowing wH-bridgeh current 500mA.A number of 8 pins work together to provide this bridge driver with its specific functions.It has a 1 output.This H bridge motor driver falls under the subcategory of Motion Control Electronics. It is similar to other parts within that category.

LA6585FA-BH Features

Available in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : LA6585

LA6585FA-BH Applications

There are a lot of ON Semiconductor
LA6585FA-BH Full Bridge Drivers, Half-Bridge Drivers applications.

V-Core
Non-V-Core
Workstations
High-Current DC-DC Point-of-Load Converters
Networking Microprocessor Voltage Regulators
Telecom Microprocessor
Voltage Regulators
Small Form-Factor Voltage Regulator Modules
Notebook Computers
VTR

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.