ONSEMI LV11961HA-AH

Manufacturer No:

LV11961HA-AH

Manufacturer:

ONSEMI

Package:

14-LSSOP (0.173, 4.40mm Width) + 2 Heat Tabs

Description:

Tape & Reel (TR) 14-LSSOP (0.173, 4.40mm Width) + 2 Heat Tabs Logic 3.6V~16V Surface Mount -40°C~150°C TJ DC Motors, General Purpose Half Bridge (2) Inductive 3.6V~16V

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

LV11961HA-AH information

ONSEMI LV11961HA-AH technical specifications, attributes, parameters and parts with similar specifications to ONSEMI LV11961HA-AH.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 1 day ago)

Factory Lead Time
8 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
14-LSSOP (0.173, 4.40mm Width) + 2 Heat Tabs

Number of Pins
14

Operating Temperature
-40°C~150°C TJ

Packaging
Tape & Reel (TR)

Published
2013

JESD-609 Code
e6

Feature
Slew Rate Controlled

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
14

Terminal Finish
Tin/Bismuth (Sn/Bi)

Applications
DC Motors, General Purpose

Subcategory
Motion Control Electronics

Max Power Dissipation
1.1W

Technology
Bi-CMOS

Voltage - Supply
3.6V~16V

Terminal Position
DUAL

Terminal Form
GULL WING

Number of Functions
1

Terminal Pitch
0.65mm

Frequency
100kHz

Number of Outputs
1

Operating Supply Voltage
12V

Supply Voltage-Min (Vsup)
3.6V

Interface
Logic

Analog IC - Other Type
BRUSHLESS DC MOTOR CONTROLLER

Operating Supply Current
2mA

Output Configuration
Half Bridge (2)

Output Current
1A

Output Current per Channel
1A

Supply Current-Max (Isup)
3mA

Collector Emitter Voltage (VCEO)
18V

Max Collector Current
1A

Voltage - Load
3.6V~16V

Fault Protection
Over Temperature, Over Voltage, UVLO

Motor Type
Brushless DC (BLDC)

Load Type
Inductive

Height
1.3mm

Length
6.95mm

Width
4.4mm

REACH SVHC
No SVHC

Radiation Hardening
No

Download datasheets and manufacturer documentation for ONSEMI LV11961HA-AH.

Datasheets:

onsemiconductor-lv11961haah-datasheets-2573.pdf

ReachStatement:

onsemiconductor-6svp22m-reachstatement-6839.pdf

LV11961HA-AH Overview

To package H bridge, use Tape & Reel (TR).In an effort to save money, H bridge is included in the 14-LSSOP (0.173, 4.40mm Width) + 2 Heat Tabs package.With the 3.6V~16V supply voltage, improved reliabilbridge drivery can be achieved.There is a mounting of H bridge circuit in Surface Mount.As long as -40°C~150°C TJ operates at the right temperature, motor driver H bridge will operate normally.H bridge motor driver has many applications, including DC Motors, General Purpose.The PCB is mounted wH gateh Surface Mount.Slew Rate Controlled is another of full bridges specific characteristics.It is possible to terminate a transmission line with a 14 termination using the H bridge which matches the characteristic impedance of the transmission line.It is used as a pronged contact as H bridge ic of a signal interface when 14 pins are used.This H bridge operates with a voltage of 12V.H bridge circuit incorporates BRUSHLESS DC MOTOR CONTROLLER as its analog IC type.As a result of the current flowing through the output and power supply pins, there is a current of 1A.There is a 1 output on it.H bridge motor drivers in the Motion Control Electronics subcategory have a number of similarities.For the highest level of efficiency, the operating supply voltage is kept at 12V.

LV11961HA-AH Features

Available in 14-LSSOP (0.173, 4.40mm Width) + 2 Heat Tabs Package / Case
Operating Temperature at the range of Surface Mount
Number of Receivers: 12V

LV11961HA-AH Applications

There are a lot of ON Semiconductor
LV11961HA-AH Full Bridge Drivers, Half-Bridge Drivers applications.

DC-DC Converters
Desktop Computers
V-Core
Non-V-Core
Workstations
High-Current DC-DC Point-of-Load Converters
Networking Microprocessor Voltage Regulators
Telecom Microprocessor
Voltage Regulators
Small Form-Factor Voltage Regulator Modules

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.