TI OPA4134UA/2K5E4

Manufacturer No:

OPA4134UA/2K5E4

Manufacturer:

Package:

SOIC

Description:

35mA per Channel 5pA 86 dB Instrumentational OP Amps 0.0001?A 36V 14 Pins SOIC

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

OPA4134UA/2K5E4 information

TI OPA4134UA/2K5E4 technical specifications, attributes, parameters and parts with similar specifications to TI OPA4134UA/2K5E4.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 1 week ago)

Package / Case
SOIC

Surface Mount
YES

Number of Pins
14

Weight
129.387224mg

Packaging
Tape and Reel

JESD-609 Code
e4

Pbfree Code
yes

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
14

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Max Operating Temperature
85°C

Min Operating Temperature
-40°C

Subcategory
Operational Amplifier

Packing Method
TR

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
4

Supply Voltage
15V

Terminal Pitch
1.27mm

Pin Count
14

Operating Supply Voltage
36V

Number of Elements
4

Operating Supply Current
4mA

Nominal Supply Current
20mA

Slew Rate
20 V/?s

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
86 dB

Current - Input Bias
5pA

Output Current per Channel
35mA

Supply Type
Dual

Input Offset Voltage (Vos)
2mV

Bandwidth
8MHz

Gain Bandwidth Product
8MHz

Neg Supply Voltage-Nom (Vsup)
-15V

Unity Gain BW-Nom
8000 kHz

Voltage Gain
120dB

Average Bias Current-Max (IIB)
0.0001?A

Power Supply Rejection Ratio (PSRR)
90dB

Low-Offset
NO

Frequency Compensation
YES

Max Dual Supply Voltage
18V

Low-Bias
YES

Micropower
NO

Min Dual Supply Voltage
2.5V

Download datasheets and manufacturer documentation for TI OPA4134UA/2K5E4.

OPA4134UA/2K5E4 Overview

There is a SOIC case in which the instrumentation amplifier is packaged. Buffer amps of this type are called OPERATIONAL AMPLIFIER-types. A Tape and Reel case is used to deliver the buffer op amp. The number of terminations is approaching the 14 mark. The total number of pins on linear amplifier is 14. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 14 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 2mV. It is possible to operate this buffer amplifier from a supply current of 4mA . 120dB should be the voltage gain. In order for this buffer op amp to function, it should have a temperature of at least -40°C degrees Celsius. At temperatures greater than 85°C, Instrumentation amplifier should not be used. There are 4 elements in total in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 36V. For the packing of the instrumentation amplifier, TR is adopted. As a general rule, you should conduct this electronic component under dual supply voltages of 18V volts.

OPA4134UA/2K5E4 Features

14 Pins
supply voltage of 15V
120dB voltage gain

OPA4134UA/2K5E4 Applications

There are a lot of Texas Instruments
OPA4134UA/2K5E4 Instrumentational OP Amps applications.

Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.