TI SN74CBT3253PWR

SN74CBT3253PWR Overview

This is a relatively small item of digital switch that is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save space on the board.Cut Tape (CT) is the method used for packaging.In terms of mounting, digital switch ic uses the method of Surface Mount.For the analog part of the multiplexers, an IC Multiplexer/Demultiplexer is used.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.Multiplexers from the 74CBT series can be used in a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.To find signal switch's related components, a base part number of 74CBT3253 may also be used.The turn signal switch is supplied with a voltage of 5V volts.In this turn signal switch, there are 16 components that can be connected to each pin.It is the end of conductors that is represented by GULL WING.There is a type of supply Single that is employed in this case.The board is configured with 16 pins.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is a member of the family of CBT/FST/QS/5C/B.Signal multiplexer consists of 8 bits.Keep Vsup at 4V to avoid unnecessary failures.There is a power supply provided for the mux switch's normal operation of 5V.There are 4 outputs designed to operate the turn signal switch.I would classify the digital switch ic as an electronic part belonging to the Other Logic ICs category.Despite not interacting with external factors, it consumes 3?A current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The signal switching is packaged by TR. A resistance of 15Ohm is used to operate it.The turn signal switch's circuit consists of 2 channels that are being used for transmission in the circuit.In addition, it provides improved characteristics compared to TTL COMPATIBLE MUX/DMUX SWITCH.It is possible to maintain stability of the multiplexers if the supply voltage to the load is set at 3?A.

SN74CBT3253PWR Features

Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
TTL COMPATIBLE MUX/DMUX SWITCH
Operating with the supply current of 3?A

SN74CBT3253PWR Applications

There are a lot of Texas Instruments
SN74CBT3253PWR Signal Switches / Multiplexers / Decoders applications.

• Communication system
• Telephone network
• Computer memory
• Transmission from the computer system of a satellite
• Time division multiplexing system
• Frequency multiplexing system
• A/D converters
• D/A converters
• Implementing boolean functions with multiple variables
• Data collection system