ST TDE1747FP

Manufacturer No:

TDE1747FP

Manufacturer:

Package:

14-SOIC (0.154, 3.90mm Width)

Description:

24V Bipolar PMIC TDE1747 14 Pin 24V 14-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TDE1747FP information

ST TDE1747FP technical specifications, attributes, parameters and parts with similar specifications to ST TDE1747FP.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 7 months ago)

Factory Lead Time
12 Weeks

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
14-SOIC (0.154, 3.90mm Width)

Number of Pins
14

Operating Temperature
-25°C~85°C TA

Packaging
Tube

JESD-609 Code
e4

Part Status
Active

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
14

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Subcategory
Peripheral Drivers

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
260

Number of Functions
1

Supply Voltage
24V

Time@Peak Reflow Temperature-Max (s)
40

Base Part Number
TDE1747

Pin Count
14

Number of Outputs
1

Max Output Current
1A

Power Supplies
24V

Supply Voltage-Min (Vsup)
8V

Interface
On/Off

Nominal Supply Current
2mA

Output Configuration
High Side

Output Current
480mA

Voltage - Supply (Vcc/Vdd)
Not Required

Input Type
Inverting, Non-Inverting

Switch Type
Relay, Solenoid Driver

Output Current per Channel
480mA

Collector Emitter Voltage (VCEO)
45V

Max Collector Current
1A

Ratio - Input:Output
1:1

Voltage - Load
10V~45V

Driver Number of Bits
1

Fault Protection
Current Limiting (Adjustable), Over Temperature

Output Peak Current Limit-Nom
0.48A

Built-in Protections
OVER CURRENT; THERMAL

Height
1.65mm

Length
8.75mm

Width
4mm

Radiation Hardening
No

Download datasheets and manufacturer documentation for ST TDE1747FP.

Datasheets:

stmicroelectronics-tde1747dp-datasheets-1569.pdf

TDE1747FP Overview

It is packaged in the form of a Tube.It is included with the 14-SOIC (0.154, 3.90mm Width) package as well.A Surface Mount mounting is used for the LED driving board.The switch type of this switch is Relay, Solenoid Driver.To ensure reliable performance, the temperature should be set to -25°C~85°C TA.The lighting driver has a total of 1 outputs that are available for use.With a supply voltage of Not Required, the LED driving board operates.A maximum output voltage of Bipolar volts can be obtained with this LED driver.As you can see, it comes from the TDE1747 family.A total of 14 terminations can be found in it.During operation, the 14 pins are used.It is important to note that the LED driving board has 1 functions.To comply with the operation criteria, the maximum output current is reduced to 1A.It is possible to obtain high efficiency with a supply voltage of 24V.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 14 pins.This results in a 480mA output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In order to operate normally, the supply voltage (Vsup) must remain above 8V.It has a power supply of 24V.

TDE1747FP Features

Supplied from 24V

TDE1747FP Applications

There are a lot of STMicroelectronics
TDE1747FP Power Switches ICs applications.

Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD
Hot Swap
Wireless Modem Data Cards
PC Cards
HDD, SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.