TI THS4011MJG

Manufacturer No:

THS4011MJG

Manufacturer:

Package:

CDIP

Description:

1 Channels 8?A 84 dB Instrumentational OP Amps 8 Pins CDIP

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

THS4011MJG information

TI THS4011MJG technical specifications, attributes, parameters and parts with similar specifications to TI THS4011MJG.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 5 days ago)

Package / Case
CDIP

Surface Mount
NO

Number of Pins
8

Packaging
Rail/Tube

Number of Terminations
8

ECCN Code
EAR99

Max Operating Temperature
125°C

Min Operating Temperature
-55°C

Subcategory
Operational Amplifier

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
THROUGH-HOLE

Number of Functions
1

Supply Voltage
15V

Terminal Pitch
2.54mm

Pin Count
8

Temperature Grade
MILITARY

Number of Channels
1

Max Supply Voltage
32V

Min Supply Voltage
9V

Power Dissipation
1.05W

Supply Current-Max
9.5mA

Slew Rate
310 V/?s

Amplifier Type
OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio
84 dB

Current - Input Bias
8?A

Input Offset Voltage (Vos)
6mV

Gain Bandwidth Product
200MHz

Neg Supply Voltage-Nom (Vsup)
-15V

Unity Gain BW-Nom
200000 kHz

Voltage Gain
80dB

Power Supply Rejection Ratio (PSRR)
80dB

Low-Offset
NO

Frequency Compensation
YES

Settling Time
37 ns

Max Dual Supply Voltage
16.5V

Low-Bias
NO

Micropower
NO

Min Dual Supply Voltage
4.5V

Bias Current-Max (IIB) @25C
6?A

Programmable Power
NO

Max I/O Voltage
6mV

Wideband
YES

Input Offset Current-Max (IIO)
0.25?A

Height
5.08mm

Length
9.6mm

Download datasheets and manufacturer documentation for TI THS4011MJG.

Datasheets:

texasinstruments-ths4011mjg-datasheets-7298.pdf

THS4011MJG Overview

Packaged in a CDIP case, the buffer op amp is ready to use. An op amp ic of the OPERATIONAL AMPLIFIER type. The op amp is delivered to you in a Rail/Tube case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. I would like to remind you that this buffer op amp should be powered by an 15V battery. I would like to specify that this buffer amplifier belongs to the Operational Amplifier-type of devices. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 6mV for this buffer op amp. 80dB should remain the voltage gain. As far as the device is concerned, buffer amplifier has 1 channels. For the buffer op amp to operate properly, it must be above the temperature of -55°C degrees Celsius. No temperature greater than 125°C should be used. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 32V. A high supply voltage of more than 9V is recommended for the instrumentation amplifier's supply voltage. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 16.5V volts.

THS4011MJG Features

8 Pins
supply voltage of 15V
80dB voltage gain

THS4011MJG Applications

There are a lot of Texas Instruments
THS4011MJG Instrumentational OP Amps applications.

Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control
Information processing
Weak signal detection

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.