TI TL082CM

Manufacturer No:

TL082CM

Manufacturer:

Package:

8-SOIC (0.154, 3.90mm Width)

Description:

50pA 70 dB Instrumentational OP Amps 0.0004?A 18V 10V~30V ±5V~18V TL082 8 Pins 8-SOIC (0.154, 3.90mm Width)

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TL082CM information

TI TL082CM technical specifications, attributes, parameters and parts with similar specifications to TI TL082CM.

Type
Parameter

Mounting Type
Surface Mount

Package / Case
8-SOIC (0.154, 3.90mm Width)

Surface Mount
YES

Number of Pins
8

Operating Temperature
0°C~70°C

Packaging
Tube

Series
BI-FET II?

JESD-609 Code
e0

Pbfree Code
no

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
1 (Unlimited)

Number of Terminations
8

ECCN Code
EAR99

Terminal Finish
Tin/Lead (Sn/Pb)

Subcategory
Operational Amplifier

Technology
BIPOLAR

Terminal Position
DUAL

Terminal Form
GULL WING

Peak Reflow Temperature (Cel)
235

Number of Functions
2

Supply Voltage
15V

Base Part Number
TL082

Pin Count
8

Operating Supply Voltage
18V

Power Supplies
+-15V

Operating Supply Current
3.6mA

Nominal Supply Current
3.6mA

Output Current
17mA

Slew Rate
13V/?s

Architecture
VOLTAGE-FEEDBACK

Amplifier Type
J-FET

Common Mode Rejection Ratio
70 dB

Current - Input Bias
50pA

Voltage - Supply, Single/Dual (±)
10V~30V ±5V~18V

Input Offset Voltage (Vos)
15mV

Neg Supply Voltage-Nom (Vsup)
-15V

Unity Gain BW-Nom
4000 kHz

Voltage Gain
100dB

Average Bias Current-Max (IIB)
0.0004?A

Power Supply Rejection Ratio (PSRR)
70dB

Low-Offset
NO

Frequency Compensation
YES

Voltage - Input Offset
5mV

Low-Bias
YES

Bias Current-Max (IIB) @25C
0.0004?A

Nominal Gain Bandwidth Product
4MHz

Max I/O Voltage
15mV

Download datasheets and manufacturer documentation for TI TL082CM.

Datasheets:

texasinstruments-tl082cm-datasheets-1544.pdf

texasinstruments-tl082cm-datasheets-1545.pdf

TL082CM Overview

There is a 8-SOIC (0.154, 3.90mm Width) case in which the instrumentation amplifier is packaged. Buffer amps of this type are called J-FET-types. A Tube case is used to deliver the buffer op amp. The number of terminations is approaching the 8 mark. The total number of pins on linear amplifier is 8. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. In order to be more specific, this instrumentation amplifier is one of the types of Operational Amplifier devices. 8 pins are included on the operational amplifiers. As far as the input offset voltage is concerned, linear amplifier rates at 15mV. For this electronic part, it is recommended that you mount it with type Surface Mount. It is important to note that this linear amplifier works well at a temperature of 0°C~70°C when it comes to operating temperatureIt is possible to operate this buffer amplifier from a supply current of 3.6mA . There should be no change in the voltage gain. There is a rating of 2 for the operating supply voltage of the buffer op amp. The operating supply voltage of the buffer op amp is rated at 18V. The BI-FET II? represents the op amp's series number.

TL082CM Features

8 Pins
supply voltage of 15V
100dB voltage gain

TL082CM Applications

There are a lot of Texas Instruments
TL082CM Instrumentational OP Amps applications.

Subtraction operation circuits
single/dual op amp sum and difference circuits
Integrator circuits
Differentiator circuits
Logarithmic operation circuits
Exponential operation circuits
Multiplication circuits
Division circuits
Precision measurement
Power control

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.