TI TPS51163DRCR

Manufacturer No:

TPS51163DRCR

Manufacturer:

Package:

10-VFDFN Exposed Pad

Description:

10 Terminals 4.5V~13.2V 10-Pin TPS51163 DC to DC converter IC SWITCHING CONTROLLER 1 Outputs 600kHz Transistor Driver

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

TPS51163DRCR information

TI TPS51163DRCR technical specifications, attributes, parameters and parts with similar specifications to TI TPS51163DRCR.

Type
Parameter

Lifecycle Status
ACTIVE (Last Updated: 1 week ago)

Factory Lead Time
8 Weeks

Mounting Type
Surface Mount

Package / Case
10-VFDFN Exposed Pad

Surface Mount
YES

Number of Pins
10

Weight
26.109911mg

Operating Temperature
-40°C~85°C TA

Packaging
Tape & Reel (TR)

JESD-609 Code
e4

Pbfree Code
yes

Part Status
Active

Moisture Sensitivity Level (MSL)
2 (1 Year)

Number of Terminations
10

ECCN Code
EAR99

Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)

Terminal Position
DUAL

Peak Reflow Temperature (Cel)
260

Terminal Pitch
0.5mm

Base Part Number
TPS51163

Function
Step-Down

Number of Outputs
1

Output Voltage
28V

Output Type
Transistor Driver

Input Voltage-Nom
12V

Analog IC - Other Type
SWITCHING CONTROLLER

Output Configuration
Positive

Output Current
1.5A

Voltage - Supply (Vcc/Vdd)
4.5V~13.2V

Control Features
Enable, Power Good

Topology
Buck

Min Input Voltage
4.5V

Control Mode
VOLTAGE-MODE

Frequency - Switching
600kHz

Max Input Voltage
13.2V

Control Technique
PULSE WIDTH MODULATION

Synchronous Rectifier
Yes

Switcher Configuration
PUSH-PULL

Max Frequency
660kHz

Max Duty Cycle
69 %

Clock Sync
No

Height
1mm

Length
3mm

Width
3mm

Thickness
900?m

RoHS Status
RoHS Compliant

Lead Free
Contains Lead

Download datasheets and manufacturer documentation for TI TPS51163DRCR.

TPS51163DRCR Overview

As a result of 10-VFDFN Exposed Pad compact design, the switching controller is compatible with most applications. 1 outputs are supported by the dc motor controller. An enclosure of Tape & Reel (TR) is used to package the PMIC. The system can process Transistor Driver dc switching's outputs (s). 4.5V~13.2V is the supply voltage and the operating voltage of the dc control. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The switching controller is capable of switching at the 600kHz position. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Power Good. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at DUAL. There are many different types of terminations for 10. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. A search for "TPS51163" will reveal other relevant dc to dc converter ics. 10 pins are present on switching converter. Statistically, the DC regulator outputs 28V voltage. It's important to remember that the dc dc regulator's normaloutput current is 1.5A, so you should note it down when starting a new project. The maximum duty cycle of this voltage regulator dc to dc is set to 69 % to ensure reliability during power-up and power-down. DC regulators have a maximum frequency of 660kHz. A circuit should contain 13.2V in order to ensure the voltage regulator dc to dc runs safely and reliably. In order to limit the voltage of a dc switcher whose maximum input voltage is 13.2V, it must be limited by the user. Voltage 4.5V is necessary for the supply.

TPS51163DRCR Features

Transistor Driver Outputs
Switching Frequency: 600kHz
Enable, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 69 %

TPS51163DRCR Applications

There are a lot of Texas Instruments
TPS51163DRCR DC to DC converter applications.

Automation technology
CMM
Various precision measuring instruments
Various precision measuring detectors
Flaw detection equipment
Balance equipment
Industrial robots
Industrial controllers
Die casting equipment
Injection molding machinery

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.