ST VNV35NV04TR-E

Manufacturer No:

VNV35NV04TR-E

Manufacturer:

Package:

PowerSO-10 Exposed Bottom Pad

Description:

N-Channel PMIC OMNIFET II?, VIPower? Series VNV35 10 Pin 5V PowerSO-10 Exposed Bottom Pad

Quantity:

Delivery:

Payment:

In Stock :Available

Price not displayed? Please send an RFQ, and we will respond immediately.

VNV35NV04TR-E information

ST VNV35NV04TR-E technical specifications, attributes, parameters and parts with similar specifications to ST VNV35NV04TR-E.

Type
Parameter

Mount
Surface Mount

Mounting Type
Surface Mount

Package / Case
PowerSO-10 Exposed Bottom Pad

Number of Pins
10

Operating Temperature
-40°C~150°C TJ

Packaging
Tape & Reel (TR)

Series
OMNIFET II?, VIPower?

Part Status
Obsolete

Moisture Sensitivity Level (MSL)
3 (168 Hours)

Number of Terminations
11

ECCN Code
EAR99

Resistance
10mOhm

Max Power Dissipation
125W

Terminal Position
DUAL

Terminal Form
GULL WING

Number of Functions
1

Supply Voltage
5V

Base Part Number
VNV35

Number of Outputs
1

Output Type
N-Channel

Max Output Current
30A

Operating Supply Voltage
18V

Interface
On/Off

Element Configuration
Single

Output Configuration
Low Side

Power Dissipation
125W

Output Current
30A

Voltage - Supply (Vcc/Vdd)
Not Required

Max Supply Current
100?A

Input Type
Non-Inverting

Turn On Delay Time
12 ?s

Switch Type
General Purpose

Rise Time
2.5?s

Drain to Source Voltage (Vdss)
40V

Fall Time (Typ)
1.5 ?s

Turn-Off Delay Time
120 ?s

Continuous Drain Current (ID)
30A

Ratio - Input:Output
1:1

Voltage - Load
36V Max

Fault Protection
Current Limiting (Fixed), Over Temperature, Over Voltage

Drain to Source Breakdown Voltage
40V

Rds On (Typ)
10m ? (Max)

Drain to Source Resistance
10mOhm

Built-in Protections
TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL

Length
9.4mm

Height Seated (Max)
3.7mm

Width
7.5mm

Download datasheets and manufacturer documentation for ST VNV35NV04TR-E.

Datasheets:

stmicroelectronics-vnb35nv04e-datasheets-7375.pdf

VNV35NV04TR-E Overview

The package is in the form of a Tape & Reel (TR).It is included in the package PowerSO-10 Exposed Bottom Pad.The lighting driver is mounted in the Surface Mount position.General Purpose is the type of switch owned by it.Ensure reliable operation by setting the temperature to -40°C~150°C TJ.The LED driver has a total of 1 outputs.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.It is part of the VNV35 family of LED drivers.It contains 11 terminations.It is necessary to use the 10 pins in order to operate the LED driver.Currently, there are 1 functions associated with the lighting driver.This results in the maximum output current dropping to 30A to meet the operation criteria.The supply voltage can be 5V for high efficiency.The lighting driver is mounted in the direction of Surface Mount.Lighting drivers with 10mOhm resistance are used.A component of this type is included in the OMNIFET II?, VIPower? series.This case results in a 30A output current.When using this LED driving board, it is recommended that the supply voltage is set to 18V.There is a maximum current requirement of 100?A for its operation.

VNV35NV04TR-E Features

Supplied from 5V
Resistance of 10mOhm

VNV35NV04TR-E Applications

There are a lot of STMicroelectronics
VNV35NV04TR-E Power Switches ICs applications.

Telecom and Network Systems
PC Card Hot Swap
Storage Drives
Portable/Handheld Devices
Wireless/Networking Cards
Low Voltage I/O System Power
Hard Disk Drives
Solid-State Drives
Hot Swap
HDD and SSD

User Guide

PURCHASE

Please verify all part numbers, quantities, and packaging preferences before placing your order. If substitutions are acceptable, please indicate this clearly. For time-sensitive projects, confirm estimated delivery dates and stock availability in advance. Once submitted, changes or cancellations may not be possible, especially for items marked as non-cancellable/non-returnable (NCNR). For international shipments, please ensure all import documentation is complete and accurate to avoid delays.

MEANS OF PAYMENT

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and Wire Transfer. Net terms may be available for qualified customers upon approval.

RFQ (REQUEST FOR QUOTATIONS)

Please ensure the part numbers and quantities are accurate and complete when submitting your RFQ.
Provide target prices and acceptable alternatives, if any, to speed up the quotation process.

IMPORTANT NOTICE

Quotations are subject to stock availability and may vary with market conditions. Prices and lead times are not guaranteed until a purchase order is confirmed. Ensure your contact details are correct to avoid delays in response.

Step1：Prepare product

Step2：Desiccant Protection

Step3：Vacuum Packaging

Step4：Individual Package

Step5：Anti-collision Filling

Step6：Packaging Box

SHIPPING COST

1. Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.).
2. Some specific products need to reach the minimum order quantity.
3. It may cost additional remote fees for delivery if you are in a remote area.

SHIPPING METHOD

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

DELIVERY TIME

1. Once the goods are shipped, estimated delivery time depends on the shipping methods you chose: FedEx International, 5-7 business days.
2. For in-stock parts, orders normally could be shipped out within 1-2days.